First Subsea Platform Mooring Connectors for Windfloat Atlantic Project
Tuesday 18 September 2018
First Subsea is supplying Platform Mooring Connectors (PMCs) to Windplus SA for the 25MW WindFloat Atlantic Project, offshore northern Portugal. The PMCs will be used to connect wind turbine generator platforms to mooring lines at a water depth of 85–100m.
The WindFloat Atlantic Project comprises three WindFloat 8MW WTG platforms that will be installed 20km off the coast from Viana do Castelo. Each platform’s mooring system is made up of three catenary mooring lines, connected to drag embedded anchors. First Subsea will supply nine Platform Mooring Connectors (PMC), each with a 5500 kN MBL.
The Platform Mooring Connector will allow the mooring lines to be pre-laid on the seabed, prior to the arrival of the WTG platforms. With the platforms in position, the end of the mooring line will be picked up from the seabed and pulled into the PMC located on the platform’s hull structure. Once in place the connector is automatically engaged and ready for service.